Archive for EFSedan.com 1987 to 1991 Honda Civic Sedan Owners Club
 


       EFSedan.com Forum Index -> Suspension/Brakes/Wheels/Tires
BLKEF4DR

SUSPENSION PROBLEM....I NEED HELP

so i put new struts and adjustable sleeves on my car and adjusted the front sleeves all the way down and the driver side sat perfect but the passenger side front fender was about 2in. from the tire so i took the sleeve off and put the spring on only and now both sides are the even..has anyone heard of this problem before??

i want to know how i can correct this problem Confused
4dred6

Blown struts? My accord wagon had blown struts on the pass side
And I had to adjust the coilover sleeve like 1 or 2 turns higher than
The driver side. So it could be leveld
FlatTireRacer

I've always had this problem when lowering EF's. I adjust for it and go on.
BLKEF4DR

struts are good....
EF4lyf3

i have had this problem before numerous times. Take a look at the bottom of the strut where it mates with the fork. Measure how much the strut sticks out/in from the fork. I had the exact measurement problem and come to find out the strut was sticking 1 1/2 out of the fork. if this is happening the your gonna need to make something that will either even it out and keep it in place under the vehicle load or you gonna need to hammer the other strut, at the fork stop. Any questions just ask, im here to help and very happy doing so.
BLKEF4DR

thanks i will check that out   Cool
BLKEF4DR



board
EF Sedan Enthusiast

Nice  Very Happy
4dred6

Looking good, new wheels?  You had some C8 or C10 no?
89 LX SOHC ZC

Lookin good man.
BLKEF4DR

thanks guys...
yeah i had circuit 8s i traded those for these konig retracks

       EFSedan.com Forum Index -> Suspension/Brakes/Wheels/Tires
Page 1 of 1
Create your own free forum | Buy a domain to use with your forum