Archive for EFSedan.com 1987 to 1991 Honda Civic Sedan Owners Club
 


       EFSedan.com Forum Index -> Drivetrain
jmanwantsboost

sohc zc cam?

Local cl has one for sale. I'd like to but it but idk if it would be any kind of upgrade over the d15 cam. Anyone heard of the specs haha. Can't seem to find a straight answer on google.
FlatTireRacer

I don't know the specs exactly but I have heard it runs a slightly more aggresive lobe than the A6 cam.
4dred6

FlatTireRacer wrote:
I don't know the specs exactly but I have heard it runs a slightly more aggresive lobe than the A6 cam.


X2
HondaJunkie

(Posted by D-Man of Honda-Tech) You will have to search some more for the zc specs but hope this helps a little.

Camshaft Specs
Special Note:You can use a D16Z Cam in a D16Y Head but you have to use the Cam Gear from a D16Z because it'll be a 1/2 timing tooth off..same goes for D16Y cam in D16Z Head,just use Cam Gear for a D16Y..Do NOT buy any aftermarket Cam Gear for a D16Y from a company if they only have one Cam Gear available for the 88 thru 00 Ds.I recommend and use a AEM Gear,they have the right Cam Gears for 88-95s and 96-00s

D16A6 Cams
........................Adv Dur..Dur@.050
........................ Int/Exh...Int/Exh...Lobe Separation...Gross Lift
Stock D16A6.......222/224..194/196........110................333/362
Crane#251-0010.226/228..200/202........107................384/376
Crane#251-0012.232/234..206/208........108................394/386
Crane#251-0014.232/228..206/202........110................394/376
Crane#251-0016.242/244..216/218........110............... 425/416

D16Z6 Cams
Comp Cams and Zex #59100
Adv Duration Duration@.050
___Int/Exh__Int/Exh_Lobe Sep_Gross Lift
PRI..228........186........111..........285
SEC.232........190........115..........300
VT..256.........215........103..........440
EXH.252........210........111..........400
Comp Cams and Zex #59300
Adv Duration Duration@.050
___Int/Exh__Int/Exh_Lobe Sep_Gross Lift
PRI..232........190........111..........300
SEC.236........194........115..........310
VT...260........220........107..........455
EXH.268........216........111..........430

D16Y8 Cams
Stock D16Y8 Cam
Adv Duration Duration@.050
___Int/Exh__Int/Exh_Lobe Sep_Gross Lift
PRI..211........183........115..........300
SEC.215........187........113..........319
VT...247........217........114..........397
EXH.235........204........110..........370
Crane#252-0010
Adv Duration Duration @ .050
____Int/Exh__Int/Exh__Lobe Sep___Gross Lift
PR.....214.........186.........108.............319
SEC...218.........190.........106.............327
VT.....258.........224.........106.............423
EXH...238.........210.........114.............386
Crane#252-0012
Adv Duration Duration@.050
____Int/Exh__Int/Exh____Lobe Sep__Gross Lift
PRI...214.........186..............112...........3 19
SEC..218.........190..............110...........32 7
VT....266.........232..............110...........4 43
EXH..246.........218..............114...........40 6

Some more misc cam specs...
http://www.hadamotorsport.com/....html

Even more cam specs..this time for D16A6s only
http://www.honda-tech.com/zerothread?id=427814

Here are JG(use at your own risk) Engine Dynamics Cam Specs...
http://www.jgenginedynamics.co...2.htm
jmanwantsboost

I found that info a couple times. Idk what the zc is based from. Just saw a zc cam on cl for 20 bucks and wondered if it would be more aggressive than my d15 cam. Sounds like it might be. Gotta get some work in so I can get my throwout and axels. Might grab the cam too if its a deal.
HondaJunkie

$20 isnt bad id offer him $15 and yes it will be more aggressive then your d15. I would recommend if you start swapping cams maybe to chip your ecu and get it tuned you dont have to but I just recommend it.
jmanwantsboost

HondaJunkie wrote:
$20 isnt bad id offer him $15 and yes it will be more aggressive then your d15. I would recommend if you start swapping cams maybe to chip your ecu and get it tuned you dont have to but I just recommend it.


It would be something to hold onto until I had the cash for a tune. Might be fun though. Add a adjustable cam gear and actually get that tuned! Meh dreaming away I suppose. Haha.
HondaJunkie

Not a dream man just takes time  Smile if only this shit would happen over night. AEM adjustable cam gear and www.phearable.net chips ecus for like $80 and sends them back within the week.
jmanwantsboost

HondaJunkie wrote:
Not a dream man just takes time  Smile if only this shit would happen over night. AEM adjustable cam gear and www.phearable.net chips ecus for like $80 and sends them back within the week.


I always have these ideas, but if I had solid work I could make en happen. But until she's solid and reliable i'll be stuck working where I am lol.
HondaJunkie

So I will find out tommarow the shipping on the axels im trying to find the smallest box I can to make it cheap as possible for you I didnt forget.
jmanwantsboost

HondaJunkie wrote:
So I will find out tommarow the shipping on the axels im trying to find the smallest box I can to make it cheap as possible for you I didnt forget.


Not an issue Smile gotta hit up my boss for some work. I work as a farm hand and make decent bank but she's been dealing with family issues so i've been running on fumes. She should have the work this week so I can cash you out for the shipping.
HondaJunkie

No worries bro take your time they will be sitting here waiting for ya.
jmanwantsboost

HondaJunkie wrote:
No worries bro take your time they will be sitting here waiting for ya.


Pm'd you address details to make getting a shipping quote far easier.

       EFSedan.com Forum Index -> Drivetrain
Page 1 of 1
Create your own free forum | Buy a domain to use with your forum