lights and bumpers (noob questions)

Icarus · lights and bumpers (noob questions)

just getting my p's and q's streight so I need to ask some noob questions... Laughing

refering to the pic in the banner...

the EF on the left....

Is that a JDM bumper?
Are those corner lights indicates? (No fender indicter?)
Where is the park lights?

The EF on the right...
Is that a USDM bumper?
Does it have a fender indicators?
Are the parks on the corners?
What are the white bits in next to the indicators in the bumper?

Other random Q's...

why have I seen some EF sedans with the bumper indicate on the corner? (like some CRX's?)

I have seen behind my oem bumper un used "cuts outs" for Stanly lights (fogs?) ( 2 cuts outs) are there any OEM bumpers with OEM fogs? Or are all the fogs I have seen after market?

In my bumper I have also found what appears to be light inserts (for some kind of light) that have the same make up as a indicator (slot in with 1 screw) anyone know this?

thanks

Embarassed

89civicracer

With the Blue Sedan in the picture. .

1). Is that the JDM Bumper?. . . YES!

2). Light on the corner indicators? NO, JDM one piece headlights only have high/low and parking lights, no blinking indicators.

3). Where are the parking lights? Right next to the Low beam
lights.Like in the USDM sedans. JDM just does not have the indicator at the headlights.

Random Q's? the Fogs on the blue sedan came OEM from the factory. So, cut outs were already there.

Hope you have been enlightened! Wink

Icarus

1 the JDM bumper has the Mugens? (doucle checking)

2 ok!

3. USDM has main head lights and parks and indicators all in one?
Shocked

4 ok!

thanks

I should post my sedan SADM so u can under stand my confusion.
Laughing

Mattes

the Sedan on the right is (if I'm correct informated) only available on the asian market - Malaysia and co.
Here you can buy the complete conversion on ebay:
Complete EF2 Front Conversion

The headlamps are broader than OEM headlamps, so you have to change the hood and the fenders, too!

89civicracer

Icarus

http://forums.hondatuningmagazine...civic-crx/some-ef-info/index.html

I might have a ED3 ???

http://www.honda-tech.com/zerothread?id=1519636

Laughing

Mattes

If you have an ED3, you have the D15B2 engine in.
It hat 1.5 Litres and 90 hp
Easy to identify at the dual point injection with 1 carb. behind the valve cover:

Greets

EF2dudesocal

yeah the jdm front is way diffrent and i might also add that the jdm hood bubbles up and it has the grill. and the usdm one bubbles down and it dont have a grill.

Icarus

Mattes

okay.
What you have, you can identify HERE:

This engine might be an D13B???
If it is a D13B, than you have an ED1.
Very, very, very rare and not sold in Europe Wink

Your VIN you can easy decipher: There stand for example:
JHMED23600S001187
For example! That's my VIN Wink

It says:
JHM = Japan, Honda Motors
ED2 = Type
3600 = 4dr Sedan with 4gear automatic transmission
S = built in Suzuka/Japan
0 = built in 1988 (1 means 1989, 2 is 1990 and 3 = 1991)
01187 = serial number
So, I have a ED2, 4dr Sedan with A/T, who was built 1988 in Suzuka. And it's the 1187's one Wink

Greetings

89civicracer

^^ GOOD TO KNOW. . I am going to check mine out in a few minutes.

Icarus

89civicracer

Icarus

~Sp33~