Dr. Unk
|
EF Sedan with B16a $800[SIZE="4"]Means of Contact[/SIZE]
Name? Ryan
Phone Number? 757-344-6346 (text is best)
Cars location? Hampton VA
Price? $800 if picked up very soon.
Firm or OBO? Firm
Trades? NONE
Good time to come look at it? Basicly anytime.
[SIZE="3"]Car[/SIZE] - 1990 Civic Sedan 225k miles zero rust. Now has very few dents and if any they are very small.
[SIZE="3"]Mods[/SIZE] -
B16a with roughly 82k (OBD-0) Burns no oil.
Tranny is a B17 and shifts great
Mild aftermarket clutch. Grabs great and has lots of life left.
DC 4-2-1 Header (hole's in the bottom from scrape's)
2.25 exhaust put on by last owner. Looks OEM for the most part.
Crappy ass intake not worth mentioning really.
Hasport Mounts
AEB intake manifold (new intake manifold gasket with 0 miles)
00 Honda Odyssey Throttle body modded to work (not getto at all)
Drop Zone Coil-Overs
Ebay springs
No name Short shifter with Type R shift knob
Things I replaced while trying to fix the vacum leak, with zero miles..
Intake manifold gasket
Most of the hose's
PVC valve
Spark plug wires
Replaced the alternator but miles are unknown on it
The Car is sitting on good condition VX Rims. Tire's have about 55% thread left.
Ive also put dent free fenders and hood on this car... however the driver side fender go pinched in by the door (easy fix)
Bad -
Vacum leak creating a 6k idle (car isnt driven under these conditions)
Car rides stiff due to the suspension. It also sits quite low.
The car and rims are primered black.
The car no longer has rear seat or trunk carpet (no I dont have them)
The car has crx turn signals which dont fit.
The car needs a valve adjustment.
Driver side window was broke out by a crack head
[SIZE="4"]Price - $800 FIRM[/SIZE]
|
