LXKID88
|
B18c1 Swap?I was just wondering if you can swap a B18c out of a Integra gs-r and put it into a 88lx.
Would this be difficult??
Help.
|
C-Rex
|
Can easily be done just time and money..
Im building a B16 sedan..
Theres already a few B20s, B16 etc here
|
JDQCIVIC4DR
|
its been done tomslick got a b18c1 turbo converted to obd1 you just need a cable tranny. or you can convert it to hydro. are you from LA cali theres a shop i go to and theres a few ef there b16 w hydro tranny. couple ef b series with a/c and power steering. some turbo.
|
LXKID88
|
Naw I'm from Florida, but thanks for the help you guys.
Appreciate it.
|
Dr. Unk
|
Yes Sir. Its not to hard. I've got a B16a in my car.... it just take's time and money as stated above. 
|
richie_b
|
i also put a b16 in my ef sedan(ee5) with a honda cr-v tranny for the 4wd, was much work, nothing plug and play, but only dropping in a b16 with front wheel drive will be no big think, its been done many times before...
|
~Sp33~
|
Your sedan is 4wd?
|
gtrpaulfarrell
|
Fairly simple, relatively speaking.
Hasport do the mounts with the clutch conversion kit quite cheap, innovative are a little cheaper but I had a bad experience with them so id stay away.
Otherwise, fuelling is really the only major concern. Im going to try to swap the fuelling system from a teg, was told that it would work but im waiting on the parts. You could also go for an uprated pump etc.
A straightforward yet rewarding swap!!!(I hope)
|
EvanFullwood
|
Where in florida are you from.
Is your car an auto, or manual?
The swap is REALLY easy...all you need is a wiring harness, obd0 or obd1, depending on if you are going to convert to obd1. You need to do dpfi to mpfi. You will need a 90-91 Integra transmission cable.
Using a cable transmission will be easiest, and cheaper than going to a hydro trans, but hasport makes a great kit, that is easy to install, if you want to use a hydro trans.
You will need b series mounts, hasport is number 1 IMO, but there are a few other companies that are good
You will need an integra rear trans bracket, and an integra halfshaft.
you can buy a custom shift linkage, or you can have yours cut and welded....
I think thats it, ha.........
|
LXKID88
|
I'm in Miami.
Thank you for the help this might happen. Eventually.. 
|
|
|
