Archive for EFSedan.com 1987 to 1991 Honda Civic Sedan Owners Club
 


       EFSedan.com Forum Index -> Write Ups & Tech Info
Ricer

90-91 Integra Front Lip install onto a EF Sedan

The mounting points itself are dead on between the integra lip and the Civic bumper. By that I mean on the underside of the bumper, the holes for the lip to bolt on, line up exactly with the DA lip.

All you need from the DA is the lip, the mounting bolts, and the metal mounting clips that are attached to the DA's bumper (for the bolts to screw into). THe clips will fit perfect into the holes on the Civic bumper. Slip all the clips onto the Civic bumper, then bolt up the lip. On both sides, the lip needs to be cut about 1in - 1 1/2in. You'll see exactly how much you need to cut off when the lip is mounted. I used a SawZall to cut the extra length off.

After you cut off the excess plastic, on the lip there will be a tab that sticks out about an inch going in toward the car. Drill a hole there so that you can put the last bolt in and bolt the lip up snug into the bumper, and thats it!
zurud

any pics?
~Sp33~

i second for pics ^^^
bigrob119

I wonder if this would work for ANY DA lip, i.e. the old school Greddy lip, PWJDM CF, ebay special urethanes, etc.
Ricer

i'm sure it would fit.. just remember you'll have to cut off a little on the ends of whatever lip you choose.. which may end up looking kinda out of place
EF Sedan Enthusiast

Here is a stock DA lip on my old daily

Guest

Wow, your sedans really coming together nicely.
Type-S EF

2dr or 4 door DA? i know my CRX lip wont fit, too wide at the wheelwells.....anyone want it lmk, ann arbor michigan
intensels4dr

i always liked that color! nice ride man. Laughing
Dysturbed_ED3

Anyone Tried a lip from a 88 Integra? It's pretty boxie looking just like ours are. That and I found 2 today at the junkyard.

Dysturbed_ED3
~Sp33~

Does the DA lip fit on the 88-89 bumpers? or only the 90-91 bumpers?
EF Sedan Enthusiast

Both
~Sp33~

Thats what i like to hear! Very Happy
Type-S EF

anyone tryed a carbon fiber lip? i think they mount differantly but should be the same shape
4door4life

heres an 89 with a da lip

~Sp33~

Sweet, great pic Smile
east_los_ef-9

sorry for th enoob question but will the 88- 89 teggy lip fit my 88 lx??
~Sp33~

Yeah it will.
east_los_ef-9

ahh sweet thanks man
Jerseys_fyn3st

the lip nd bumper on my sedan looks alot diff then all of those ima get sum pics asap my lip wraps around the middle of the bottom bumper its crazy ima show yall
BLKEF4DR

mine is off of a 89 integra mounts up the same

Monjan

thanks for the write up!!  Very Happy  now i just gotta go find me a DA lip!
zoomownsanEF

Monjan wrote:
thanks for the write up!!  Very Happy  now i just gotta go find me a DA lip!

same here.
im in need of a lip.ha
mp_89dx

sweet i actually have one laying around that i was going to use in a past project. Looks like I finally found a use for it!
zoomownsanEF

i installed my lip like four days ago,
but i used zip ties to make the corners get snug with the sides.
but it looks half assed.how do i make it snug like the pics up there.
mines have like a 1/2 inch gap between the lip and bumper.

i hope i made sense,
~Sp33~

I drilled the bottom of the bumper, and the bottom of the lip and used nuts/washers/bolts to hold the lip on.

If it's sitting crooked you can use a spacer between the bumper and the lip to even it out.
zoomownsanEF

~Sp33~ wrote:
I drilled the bottom of the bumper, and the bottom of the lip and used nuts/washers/bolts to hold the lip on.

If it's sitting crooked you can use a spacer between the bumper and the lip to even it out.

shoot iknew i had to drill somewhere,not i gottafind my drill thanks man.
but i like it it sits straight and stealth!
wid

The DA lip also fits on the hatchback bumpers as well with not much modifying as well.  I havent had a chance to install mine on my sedan but here are some pics for reference on how I did on my hatch.

As you can see the holes line up but it is a little too long on the ends.


This is the extra length.


I used a stack of washers to even it out on the sides.
JapJunkie

It's time for a DA lip.
Projekt_ED3

The AV Integra front lip will work too. Here is a pic of mine.


[/img]
Jose

interesting

What you said it is very interesting.
Jose

I just not very clearly know that.
frankef2

^ it looks just like my car, haha. ill try to do this lip on mine.

       EFSedan.com Forum Index -> Write Ups & Tech Info
Page 1 of 1
Create your own free forum | Buy a domain to use with your forum