Archive for EFSedan.com 1987 to 1991 Honda Civic Sedan Owners Club
 


       EFSedan.com Forum Index -> Write Ups & Tech Info
Jerseys_fyn3st

90/91 CRX SI "DASH install" into 90/91 sedan

Alright fellas well here's my write up on  how i installed my 90/91 Crx Si complete dash into my 90/91 EF sedan

Before anything please when you get a crx dash make sure you grab all the brackets from the crx because if not you will not be installing your crx dash into your sedan.

step 1: remove your sedan dash
------------------------------------------



-------------------------------------------
After you remove your dash on the drivers side there will be this bracket that needs to be cut off in order for you to use the coin holder on the crx dash.. " not sure why HONDA didn't add this to the 90/91 sedan =(" .. I used a grinder with a cutoff wheel .



-------------------------------------------
Near the shifting area as you can see the CRX bracket "wider bracket" is much larger then the sedan bracket, this bolts right up



-------------------------------------------

At the center audio consol "AREA" there's a bracket that will hold the dash in place as well. the smaller bracket "in length" is the CRX bracket and the larger bracket "in length" is the sedans bracket. It bolts up directly.



-------------------------------------------

You might need to use a screw driver to lift the Crx bracket up a little once it is bolted in place , to meet the holes correctly as i done here..


-------------------------------------------

As for the sedan climate control it bolts up with 0 issues



-------------------------------------------

And honestly once that is in place you can go ahead and finish bolting up your CRX dash in all the same sedan spots, sides and underneath as well.

As for the cluster bezel ppl complained that they could not get it to fit with the sedan column cover but here's how you go about that as well =)

You will trim the right side just a little bit, exactly where i am pointing.





And here as you can see it fits with no issues at all =)



As for the  CRX hazard switch and rear defroster,  you plug them directly in as the 90/91 models share same rear plugs just different shape buttons


Enjoy you new CRX dash in your SEDAN =)
Jerseys_fyn3st

And you will use HB or CRX glove box as well
Jerseys_fyn3st

PLEASE!!!!! whoever has the EF face book groups please link them to here as i promised them guys months ago this write up , it will be greatly appreciated ... my name on fb is "EF ALLDAY" and my account is down temp. for personal reasons  thanks again guys.
89civicracer

Nice write up..  Very Happy
89ef2

89civicracer wrote:
Nice write up..  Very Happy
Jerseys_fyn3st

Will update this with little more detail soon as I get home fellas trying to make it the best "diy" out there. Because other diy's leave out little details that make ppl wanna sat Fck it and give up lol.

       EFSedan.com Forum Index -> Write Ups & Tech Info
Page 1 of 1
Create your own free forum | Buy a domain to use with your forum